RGT Fork
Our RGT fork delivers an upgrade pack to any contemporary all-road / gravel bike with matching geometry. It boasts tire clearance up to 47-622 or 54-584, accepts brake rotors up to 180 mm and is ready to work with frames that route cables fully internally. Triple cage mounts on each fork leg help carry more gear along, all while being lightweight and stiff thanks to an advanced carbon fiber construction.
COLOR
Black
MATERIAL
Full UD carbon fiber
STEERER
Tapered , 1-1/8" - 1-1/2", 300 mm length
S.H.I.S. DIMENSIONS
28.6 | 40
OFFSET
50 mm
AXLE TO CROWN
400 mm
HUB SPACING
100 mm
BRAKE
Flat Mount 160, rotor size 160 - 180 mm
INTERNAL ROUTING
Brake hose / dynamo cable
MOUNTS
Triple cage / head light / mudguards
INCLUDED
Through axle, expander, cable port plugs
WEIGHT
510 g (w/o through axle, w/o bolts, uncut steerer)
TIRE CLEARANCE
47 - 622 / 54 - 584
MAXIMUM SYSTEM WEIGHT
130 kg
EXTRA INFO
Two front brake routing options: fully internal brake hose routing (front brake line enters fork through steerer tube port) or semi internal brake hose routing (front brake line enters fork through fork blade port). Steerer tube port can also be used for fully internal hub dynamo cable routing. The minimum distance between fork crown and upper headset bearing is 80 mm.
CROWN DIAMETER
57 mm
ASTM RIDING CONDITION
2
HUB TYPE
12 x 100 mm
TA TOTAL LENGTH (CLOSED)
120 mm
TA DIAMETER
12 mm
TA THREADING DIAMETER X PITCH
M12 x 1.5
MIN. THREAD LENGTH
14 mm
MAX. DIAMETER HUB ENDCAPS
21 mm
NOTE: The RGT fork is NOT approved for rack usage. Only water bottle / triple cage mounts. If you need to use a rack check out our MGV fork. The maximum cage mount load refers to the dynamic load that the mounts are exposed to. Forks with mounted cages must be treated with great care. Leaning the bike with the cage against a wall or onto the ground, or hitting obstacles with the cage will result in a dynamic load that exceeds the maximum load by far. Installed cages need to touch the fork blade surface within a radius of 5 mm around the center of the mounting bolt. Some cages might need to use washers between cage and fork blade.
